NAT

MIKROTIK NAT

This is a short howto explaining how to set up a full-NAT on a Mikrotik RouterOS.

This setup lets you hide your private ip from the public network. This means that in your private network you can have whatever private ip you want which is translated to the public network ip given to you by your network provider.

Suppose you are 192.168.1.2/24 (Private) 
Your RouterBoard's Ethernet card is 192.168.1.1/24 (Private) 
Your RouterBoard's Wireless card is 10.140.1.30/26 (Public) 
The Access Point You connect to is 10.140.1.1/26 (Public) 

Reference: http://www.mikrotik.com/testdocs/ros/2.8/howto/howto.pdf

Specify the ip addresses 1/2

Specify the ip addresses 2/2

Fix the static routes so you can access the network 1/2

Fix the static routes so you can access the network 2/2

Start building the NAT 1/2

Start building the NAT 2/2

DST-NAT 1/2

DST-NAT 2/2

SRC-NAT 1/2

SRC-NAT 2/2

NAT COMPLETED